R&S SMCVB-K156, User Manual

Page: 65 / 79

Remote-Control Commands
R&S
®
SMCVB-K156
65 User Manual 1179.1029.02 ─ 02
:TSGen:CONFigure:PIDTestpack <PIDTestpack>
Sets the PID, if
:TSGen:CONFigure:TSPacket
is
H184|H200|H204
.
Parameters:
<PIDTestpack> VARiable | NULL
*RST:
NULL
Example: See Example "Configure and monitor TS player output"
on page 63.
Manual operation: See "PID Test Packet" on page 38
:TSGen:CONFigure:PLAYfile <PlayFile>
Specifies the file path and filename of the TS player file.
Parameters:
<PlayFile> string
Example: See Example "Play a TS player file" on page 62.
Manual operation: See "Select File" on page 33
:TSGen:CONFigure:PLENgth <PLength>
Queries the packet length of the loaded file.
Parameters:
<PLength> P188 | P204 | P208 | INV
*RST:
INV
Example: See Example "Configure and monitor TS player output"
on page 63.
:TSGen:CONFigure:PRBS[:SEQuence] <PRBS>
Sets the length of the PRBS sequence.
Parameters:
<PRBS> P15_1 | P23_1
*RST:
P23_1
Example: See Example "Configure and monitor TS player output"
on page 63.
Manual operation: See "PRBS" on page 39
:TSGen:CONFigure:SEAMless:CC <CC>
Activates the correction of the continuity counters in the replayed TS data stream. The
correction allows you to decode the stream without interruption when the play file is
looping.
TSGen Subsystem