R&S SMCVB-K156, User Manual

Page: 49 / 79

Remote-Control Commands
R&S
®
SMCVB-K156
49 User Manual 1179.1029.02 ─ 02
6.1 General Commands
Example: Storing current configuration
:SOURce1:BB:TDMB:SETTing:STORe "/var/user/my_TDMB"
// Stores the file "my_TDMB.tdmb" in the directory as above.
*RST
:SOURce1:BB:TDMB:SETTing:CATalog?
// Response: "my_TDMB"
:SOURce1:BB:TDMB:SETTing:LOAD "/var/user/my_TDMB"
:SOURce1:BB:TDMB:STATe 1
:SOURce1:BB:TDMB:SETTing:DELete "/var/user/my_TDMB"
Commands
[:SOURce<hw>]:BB:TDMB:PRESet
................................................................................... 49
[:SOURce<hw>]:BB:TDMB:STATe
..................................................................................... 49
[:SOURce<hw>]:BB:TDMB:SETTing:CATalog?
................................................................... 49
[:SOURce<hw>]:BB:TDMB:SETTing:DELete
...................................................................... 50
[:SOURce<hw>]:BB:TDMB:SETTing:LOAD
........................................................................ 50
[:SOURce<hw>]:BB:TDMB:SETTing:STORe
.......................................................................50
[:SOURce<hw>]:BB:TDMB:PRESet
Sets the parameters of the digital standard to their default values (
*RST
values speci-
fied for the commands).
Not affected is the state set with the command
SOURce<hw>:BB:TDMB:STATe
.
Example: See Example "Storing current configuration" on page 49.
Usage: Event
Manual operation: See "Set To Default" on page 18
[:SOURce<hw>]:BB:TDMB:STATe <State>
Activates the standard and deactivates all the other digital standards and digital modu-
lation modes in the same path.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
0
Manual operation: See "State" on page 17
[:SOURce<hw>]:BB:TDMB:SETTing:CATalog?
Queries the files with settings in the default directory. Listed are files with the file exten-
sion
*.tdmb
.
General Commands