R&S RTO6, User Manual

Page: 2431 / 2677

Remote control commands
R&S
®
RTO6
2431 User Manual 1801.6687.02 ─ 05
ACQuire:POINts:DVALue?
Returns the current digital record length used by each digital channel.
Return values:
<DigReclgth> Range: 1000 to 200E6
Increment: 2
*RST:
1000
Default unit: pts
Usage: Query only
Asynchronous command
24.18.4 Trigger settings for digital signals and parallel buses
In all
TRIGger<m>:PARallel
commands, the trigger suffix <m> is always 1 and can
be omitted. It selects the trigger event: Only the A-trigger is available for triggering on
digital signals and parallel buses.
● General commands .............................................................................................2431
● Edge trigger .........................................................................................................2433
● Width trigger ........................................................................................................2434
● Timeout trigger .................................................................................................... 2435
● Setup & Hold trigger ............................................................................................2436
● State trigger .........................................................................................................2437
● Pattern trigger ..................................................................................................... 2437
● Serial pattern trigger ............................................................................................2440
24.18.4.1 General commands
TRIGger<m>:SOURce[:SELect]
.....................................................................................2431
TRIGger<m>:PARallel:TYPE
.........................................................................................2432
TRIGger<m>:PARallel:SETHold:CSOurce[:VALue]
.......................................................... 2433
TRIGger<m>:PARallel:STATe:CSOurce:VALue
................................................................2433
TRIGger<m>:PARallel:SPATtern:CSOurce[:VALue]
......................................................... 2433
TRIGger<m>:PARallel:EDGE:EXPRession[:DEFine]
........................................................2433
TRIGger<m>:PARallel:WIDTh:EXPRession[:DEFine]
.......................................................2433
TRIGger<m>:PARallel:TIMeout:EXPRession[:DEFine]
.....................................................2433
TRIGger<m>:PARallel:STATe:EXPRession[:DEFine]
........................................................2433
TRIGger<m>:PARallel:PATTern:EXPRession[:DEFine]
.....................................................2433
TRIGger<m>:PARallel:SPATtern:EXPRession[:DEFine]
................................................... 2433
TRIGger<m>:SOURce[:SELect] <SourceDetailed>
Selects the source of the trigger signal.
Mixed signal option (MSO, R&S RTO6-B1)