Putting into Operation
R&S
®
RT-ZS60
18
User Manual 1418.7342.02 ─ 04
Figure 2-2: Offset compensation voltage and dynamic range
There are several ways to set the offset compensation:
●
Use the vertical knob at the oscilloscope if its function is set to offset.
●
Enter the offset value in the channel settings or probe settings on the
R&S
RTx.
●
Use the micro button to measure input signals with different DC offsets: assign
"Set offset to mean" to the micro button. See also
Chapter 2.3.2, "Micro But-
ton"
,
on page 17.
For more details, see the oscilloscope's user manual.
2.3.4
R&S
ProbeMeter
The R&S
ProbeMeter is an integrated voltmeter that measures DC voltages with
higher precision compared to the oscilloscope's DC accuracy. The DC measure-
ment is performed continuously and in parallel to the time domain measurement
of the oscilloscope.
Using the Probe
