R&S NGL-B105 User Manual Download

Page: 90 / 176

Instrument Functions

R&S

NGL200/NGM200

User Manual 1178.8736.02 ─ 05

Figure 6-45: Device information dialog

Device information

Description

Model

Model of the instrument.

Instrument orderable part number.

Serial No.

Unique identification number for the instrument.

Version

Software version that is installed in the instrument.

Hardware IDs

Unique serial number of the front and mainboard of
the instrument.

Temperatures

Temperature in degrees measured in both Ch1 and
Ch2.

If the temperature exceeded the specification, "Over
Temperature Protection" (OTP) is triggered and the
respective output channel is turned off.

Misc

Temperature measures for CPU.

Fan speed and memory capacity in the instrument.

6.16.6

Update Device

Latest instrument firmware is available in the R&S

NGL/NGM product homepage.

1. Select the "Update Device" to update instrument firmware.

The R&S

NGL/NGM displays the update device dialog.

General Instrument Settings

Summary of Contents for NGL-B105

















































































































































































Search results

Summary of Contents for NGL-B105

Reviews:

Related manuals for NGL-B105

Brands by name

Popular brands

R&S NGL-B105, User Manual

Search results

Summary of Contents for NGL-B105

Reviews:

Related manuals for NGL-B105

Brands by name

Popular brands