R&S NGL-B105 User Manual Download Page 73

Page: 73 / 176

Instrument Functions

R&S

NGL200/NGM200

User Manual 1178.8736.02 ─ 05

3. Select "Logging" menu item from the menu.

The R&S

NGL/NGM displays the "Logging" dialog.

4. Select the "Save Location" menu item to select the predefined target folder for data

logger.

● "Auto": "Target Folder" is auto-selected.

If no USB stick is detected, "Target Folder" is set to internal memory ("int") par-
tition. By default, "USB1A" partition is selected.

● "Manual": Choice of "Target Folder".

Selection is possible only if USB stick is detected.

Figure 6-28: Target folder dialog

5. Set the required "Target Folder".

6. Select "Mode" to set logging duration.

● "Duration": Time taken for data logging with duration and time interval setting.
● "Span": Time taken for data logging with start time, time interval and duration

setting

● "Unlimited": Data logging with time interval setting. The data logging continuous

until function is deactivated.

● "Count": Data logging with number of counts and time interval setting

7. Depending on the selected mode, configure the required settings for the data log-

ging duration.

Data Logging

Summary of Contents for NGL-B105

















































































































































































Search results

Summary of Contents for NGL-B105

Reviews:

Related manuals for NGL-B105

Brands by name

Popular brands

R&S NGL-B105, User Manual

Search results

Summary of Contents for NGL-B105

Reviews:

Related manuals for NGL-B105

Brands by name

Popular brands