Rand McNally Intelliroute TND-510 User Manual Download Page 80

Page: 80 / 148

Rand McNally IntelliRoute

TND

510 User’s Guide

Version 2.0.1

Consumer Point of Interest Confi rmation Window

Destination Address

The selected location address.

Begin New Route

Tap to begin routing to destination.

Add as Via

Add this location as an interim stop between the origin and destination.

Save to Address Book

Add the location to the Address Book. See “Address Book” on page 57.

Atlas

Cross-reference to printed Rand McNally Motor Carriers’ Road Atlas. “P”
refers to the Road Atlas page number. The letter-number combination
after that refers to the grid location

Go to Map

Tap to view this location on a map.

Back

Tap to return to previous window.

Set Origin

Tap to set the location as the origin in a route.

Menu

Tap to return to the

Main Menu

Consumer Point of Interest Confi rmation Window

Summary of Contents for Intelliroute TND-510





















































































































































Search results

Summary of Contents for Intelliroute TND-510

Reviews:

Rand McNally Intelliroute TND-510, User Manual, Page: 80 / 148

Search results

Summary of Contents for Intelliroute TND-510

Reviews: