Rand McNally Intelliroute TND-510 User Manual Download Page 18

Page: 18 / 148

Rand McNally IntelliRoute

TND

510 User’s Guide

Version 2.0.1

Power the Device

Note:

To maximize battery life, plug in the IntelliRoute® TND™ 510 for the fi rst

two (2) hours of use. See “First Time Use” on page 9.

Turn the Device On

• Press and hold the

Power Key

for two (2) seconds, then release.

(After 5-10 seconds, the Rand McNally splash window displays as the device
powers on.)

Turn the Device Off

• Press and hold the

Power Key

for fi ve (5) seconds, then release.

A message displays indicating that the device is powering off .

Enter or Return from Standby (Sleep) Mode

Note:

Standby mode is not available with all models.

• Press and release the

Power key

Note:

The device performs a status check when returning from Standby mode.

The IntelliRoute TND 510 restarts if the status check determines it is necessary to
do so.

Summary of Contents for Intelliroute TND-510





















































































































































Search results

Summary of Contents for Intelliroute TND-510

Reviews:

Rand McNally Intelliroute TND-510, User Manual, Page: 18 / 148

Search results

Summary of Contents for Intelliroute TND-510

Reviews: