Rand McNally Intelliroute TND-510 User Manual Download Page 126

Page: 126 / 148

Rand McNally IntelliRoute

TND

510 User’s Guide

Version 2.0.1

119

Create a Custom POI Location File

Use the following steps to create a custom POI location fi le.

1. Create a .txt or .csv fi le. (Use a standard text editor or spreadsheet program).

2. Name the fi le.

3. Save the fi le.

The fi le contains one line for each location.

See:

• “Add a Custom POI Location Method 1 (Latitude/Longitude)” on page 119.

• “Add a Custom POI Location Method 2 (Street Address)” on page 120.

• “Add a Custom POI Location Method 3 (Full Information)” on page 121.

Add a Custom POI Location Method 1 (Latitude/
Longitude)

Note

: Enter longitude fi rst.

1. Enter the longitude followed by a comma(,)

2. Enter the latitude fi rst followed by a comma (,)

3. Enter the location name.

Note

: Do not add a comma after the location name .

4. When

fi nished adding locations, save the fi le.

5. Send the fi le to your TND. See page 133.

Summary of Contents for Intelliroute TND-510





















































































































































Search results

Summary of Contents for Intelliroute TND-510

Reviews:

Rand McNally Intelliroute TND-510, User Manual, Page: 126 / 148

Search results

Summary of Contents for Intelliroute TND-510

Reviews: