Page 13
WES+ Installation and Operations Manual V2.3 Ramtech Electronics 2017
Once a unit has been added to a site group, the site name will be
displayed. Note: by default, this is ‘DEFAULT SITE’. Please ensure you
change it to reflect the location of your site, as this will be used in text
message alerts to identify the site where an alarm has been activated.
The following logs are accessible from the System Log menu:
• Fire Alarms
• Silent Tests
• External Tampers
• Internal Tampers
• DT Head Tampers
• Low Signals
• Low Batteries
• Flat Batteries
• Latched Units
• Unit Removed
All logs are in the same format with the most recent event at the top
of list.
Each log entry starts with the date and time the event was logged,
followed by the unit number and type and then a + or – symbol to
indicate the raising (+) or clearing (-) of an event. If there is a down
arrow in the bottom right corner, there are further log entries which can
be displayed by pressing the down arrow on the navigation pad.
The below example shows the External Tamper Log where unit BASE
had an External Tamper cleared at 11:20 on 23rd September.
Exit the log display using the left arrow key on the navigation pad.
Logs can be cleared by either deactivating the unit (see ‘Removing a
unit from the site’) or using the Clear All Logs option at the end of the
System Log Menu. This can only be performed by an authorised user
as it requires the access code.
System Logs
Settings
The Settings menu can be accessed from the Main Menu by selecting
Settings with the directional pad then pressing Enter.
