R A M S E T
z
R A M S E T
z
R A M S E T
RA
MS
ET
z
RA
MS
ET
z
RA
MS
ET
- 6 -
GATE TRAVEL ADJUSTMENT
To adjust gate travel, depress spring loaded bracket and spin each Adjustment Nut to the
required position (
Figure 6
). LED must turn on to indicate position open or close when limit
switch is activated by limit switch adjustment nut.
PUSHBUTTON CONTROLS
Three pushbuttons are located under the dip switches for manual operation of the gate (see
Figure 7
).
The open, stop, and close buttons can be utilized to set limit switches and verify proper system opera-
tion when installing or servicing an operator.
Open
Pressing this button will cause the gate to open.
Stop
Pressing this button will cause the gate to stop moving.
Close
Pressing this button will cause the gate to close.
TURN POWER OFF BEFORE
ATTEMPTING ADJUSTMENT
Adjustment
Nuts
Depress spring loaded bracket
to free Adjustment Nuts.
Figure 6
OPEN
STOP
CLOSE
L.E.D.’s light up when
function is activated
Figure 7
Limit Switches