RAMMER 255E, Operator'S Manual

Page: 36 / 68

COPYRIGHT © 2020 SANDVIK MINING AND CONSTRUCTION OY Page 36 - Operation
Operation 255E
5.6 STORAGE
LONG TERM STORAGE
Observe the following points when the hammer is stored. In this way the vital parts
of the attachment are protected from rust and the machine is ready to be used
whenever necessary.
1. The storage area must be dry.
2. The tool must be removed in hydraulic hammers.
3. The lower end of the piston, tool and tool bushings must be well protected with
grease in all hydraulic hammers.
4. Connections must be sealed with clean plugs to prevent oil leakage and dirt
from getting into couplings.
5. The product must be stored in the vertical position.
6. Make sure the product cannot fall.