RAMMER 255E, Operator'S Manual

Page: 10 / 68

COPYRIGHT © 2020 SANDVIK MINING AND CONSTRUCTION OY Page 10 - Operation
Product introduction 255E
Lifting devices must safely carry the working weight of the product. See “Hammer
specifications” on page 60. Place chains or slings, as shown by the illustration, to
lift the product.
SAFETY INSTRUCTIONS FOR LIFTING
Below are some common safety instructions concerning lifting operations. In
addition to this, the local, national standards for machines and lifting-equipment
must always be strictly observed. Please note that the list below is not all inclusive,
you must always ensure the procedure you choose is safe for you and others.
■
Do not lift load over people. No one shall be under the hoisted load.
■
Do not lift people and never ride the hoisted load.
■
Keep people clear from lift area.
■
Avoid side pull of the load. Make sure you take up the slack slowly. Start and
stop carefully.
■
Lift load a few centimeters and verify it before proceeding. Make sure the load
is well balanced. Check for any loose items.
■
Never leave the suspended load unattended. Maintain load control at all times.
■
Never lift a load that is over the rated capacity (see the product's operating
weight on the specification page).
■
Inspect all lifting equipment before use. Do not use twisted or damaged lifting
equipment. Protect lifting equipment from sharp corners.
■
Obey all local safety instructions.
R010415