RAMMER 255E, Operator'S Manual

Page: 38 / 68

COPYRIGHT © 2020 SANDVIK MINING AND CONSTRUCTION OY Page 38 - Lubrication
Hammer tool greasing 255E
1. HAMMER TOOL GREASING
1.1 RECOMMENDED GREASES
For tool lubrication use only RAMMER TOOL GREASE, part no. 902045 (400 g
cartridge), part no. 902046 (18 kg drum), or any grease that meets the following
criteria:
■
No dropping point or very high, over 250 °C (480 °F).
■
Maximum service temperature at least 150 °C (300 °F).
■
Minimum working temperature below lowest ambient temperature.
■
Additives: molybdenum disulfide (MoS
2
), graphite or equivalent.
■
Penetration 0 ... 2 (NLGI).
■
No reaction with hydraulic oils.
■
Water resistant.
■
Good adhesion with steel.
Wear gloves when handling the grease containers. If you get grease onto your
skin, wash it away with soap and water.
R020112