RAMMER 2155E, Operator'S Manual

Page: 46 / 80

COPYRIGHT © 2019 SANDVIK MINING AND CONSTRUCTION OY Page 46 - Lubrication
Hammer tool greasing 2155E STD
1.3 RAMLUBE II
Dispose of empty grease containers appropriately.
The hammer can be equipped with an automatic greasing device Ramlube II. See
“Ramlube II” on page 14.
Do not remove the grease cartridge unnecessarily. Always keep the grease cartridge
in the greasing device to prevent dirt from entering the greasing device.
Note: Some hammer models are equipped with an adapter kit for manual greasing
and do not include an automatic greasing device.
REPLACING THE GREASE CARTRIDGE
Measure the distance from the top of the grease cartridge. Replace the grease
cartridge if the distance is more than 200 mm (7.87 in). The grease cartridge is
empty and has to be replaced when the distance is 210 mm (8.27 in).
1. Unscrew and remove the grease cartridge.
2. Dispose the used cartridge appropriately. Note: The grease cartridge is
disposable; it can not be refilled.
3. Check and clean the grease cartridge seat in the cartridge holder. Remove the
old grease cartridge seal.
0.5-turn adjustment 0.05 g grease/impact period
min adjustment 0.07 g grease/impact period
max adjustment 0.33 g grease/impact period
Item Specification
R020105
200 mm