RAMMER 2155E, Operator'S Manual

Page: 76 / 80

COPYRIGHT © 2019 SANDVIK MINING AND CONSTRUCTION OY Page 76 - Specifications
CE mark and EC Declaration of Conformity 2155E STD
3.1 IMPORTANT INFORMATION CONCERNING THE REMOTE MONITORING
DEVICE AND DATA PRIVACY
Important notice: This 2155E
Hereinafter referred to as the "Product", is equipped with a remote monitoring service device which collects
location data and data of usage of the Product (including remote monitoring hardware and software installed,
connected, and activated by Sandvik at the factory or otherwise) in order for Sandvik to (i) provide you and
Sandvik's distributor/sub-distributor(s) involved in the sale of the Product ("Distributors") with the availability
to Product data via a web managed (or similar) subscription service received following online acceptance of
www.mybreakersfleet.rocktechnology.sandvik/ web portal terms and conditions ("Equipment Monitoring
Service"); and (ii) to collect information from the Product in order to monitor the performance, reliability and
to track the Product's operational efficiency as well as develop the data. Sandvik reserves the right to anonymize
and/or aggregate any data which is created, generated, derived or produced by Sandvik in the Equipment
Monitoring Service or otherwise created through the use of the Equipment Monitoring Service, such data never
to contain any personal data with the meaning given in the General Data Protection Regulation ((EU) 2016/679),
into a new set of data. By using the Product, you consent and agree that Sandvik may generate, collect, record,
upload, store, analyse and process standard industry information and data relating to the activity and condition
of the Product, including but not limited to location, engine, percussion and /or transmission hours. You agree
and acknowledge that Sandvik may use as well as disclose such data to its affiliates or other members within
the Sandvik Group, its Distributors and to third parties providing services to the Sandvik Group for optimizing
the schedule of its services and parts deliveries and for improving its customer support and/or for any internal
purposes, including but not limited to product development, business and marketing analyses and improvement
of its products' performance and availability. In the event you wish to withdraw your consent to collect, store
and process such data, please request Sandvik in writing to stop collecting and processing such data. A separate
three (3) months' advance notice is needed per each unit of Product and shall state at least (i) the serial number
of the Product and (ii) the end date of your consent. Please note that if you decide to withdraw your consent, it
may affect the validity of the agreements in connection with Product and may lead to the termination of an
agreement in accordance with the terms and conditions of the agreement (including but not limited to
maintenance agreements and extended warranty agreements). For more information and in order to monitor
your own Product, please visit the following web page: www.mybreakersfleet.rocktechnology.sandvik/.