RAMMER 2155E, Operator'S Manual

Page: 23 / 80

Operation - Page 23 COPYRIGHT © 2019 SANDVIK MINING AND CONSTRUCTION OY
Safety 2155E STD
LIFTING EQUIPMENT
You can be injured if you use faulty lifting equipment. Make sure that lifting
equipment is in good condition. Make sure that the lifting equipment complies with
all local regulations and is suitable for the job. Make sure that the lifting equipment
is strong enough for the job and that you know how to use it.
Do not use this product or any of its parts for lifting. See “Lifting instructions” on
page 9. Contact your carrier dealer to find out how to lift with your carrier.
SPARE PARTS
Use only genuine spare parts. Use only genuine tools with hydraulic hammers. The
use of other spare part or hammer tool brands may damage the product.
EQUIPMENT CONDITION
Defective equipment can injure you or others. Do not operate equipment which is
defective or has missing parts.
Make sure the maintenance procedures in this manual are completed before using
the product.
REPAIRS AND MAINTENANCE
Do not try to do repairs or any other maintenance work you do not understand.
MODIFICATIONS AND WELDING
Non-approved modifications can cause injury and damage. Contact your local
dealer for advice before modifying the product. Before welding on the product
while it is installed on the carrier, disconnect the carrier alternator and battery. Note
that welding of the hammer tools will render them useless and make the warranty
void.
METAL SPLINTERS
You can be injured by flying splinters when driving metal pins in and out. Use a
soft-faced hammer or drifts to remove and fit metal pins, such as pivot pins. Always
wear safety glasses.