RAMMER 2155E, Operator'S Manual, Page: 39 / 80

Operation - Page 39 COPYRIGHT © 2019 SANDVIK MINING AND CONSTRUCTION OY
Operation 2155E STD
5.5 SPECIAL CONDITIONS OF USE
Special conditions of use are conditions in which the hammer is used for some work
other than normal breaking or demolition, such as:
■
Tunneling
■
Scaling
■
Foundry cleaning
■
Underwater operations
■
Operations in extremely low or high temperatures
■
Use of special hydraulic fluids
■
Hammer operations with a special carrier (e.g., an extra long boom)
■
Other special conditions
Special conditions of use may require modifications to the attachment, special
operating techniques, increased maintenance or special wear items. If you are
planning to use the hammer under a special condition of use, please consult your
local dealer for instructions.
5.6 STORAGE
LONG TERM STORAGE
Observe the following points when the hammer is stored. In this way the vital parts
of the attachment are protected from rust and the machine is ready to be used
whenever necessary.
1. The storage area must be dry.
2. The tool must be removed in hydraulic hammers.
3. The lower end of the piston, tool and tool bushings must be well protected with
grease in all hydraulic hammers.
4. Connections must be sealed with clean plugs to prevent oil leakage and dirt
from getting into couplings.
5. The product must be stored in the vertical position.
6. Make sure the product cannot fall.