SERVICING AND MAINTENANCE
321
4. Rotate the bulb socket counterclockwise a
quarter turn to unlock it from the housing.
Wiring Harness Connector
5. Pull the bulb straight out of the socket.
6. Reverse the procedure to install the bulb
and housing.
Center High Mounted Stop Lamp (CHMSL)
With Cargo Lamp
See below steps to replace.
1. Remove the two screws holding the
housing/lens to the body as shown.
CHMSL Mounting Screw Locations
2. Separate the connector holding the housing
and wiring harness to the body.
CHMSL Connector Location
3. Turn the desired bulb socket a quarter turn
and remove the socket and bulb from
housing.
4. Pull the desired bulb straight from the
socket.
CAUTION!
Do not contaminate the bulb glass by
touching it with your fingers or by allowing it
to contact other oily surfaces. Shortened bulb
life will result.
8
21_DS_OM_EN_USC_t.book Page 321
