IN CASE OF EMERGENCY
273
Front Lifting Point
When changing a front wheel, place the
scissor jack under the rear portion of the
lower control arm as shown below.
Front Jacking Location
Rear Jacking Location
Operate the jack using the extension with
jack hook and the lug wrench. The exten
-
sion tubes may be used but are not re
-
quired.
When changing a rear wheel, assemble the
extension with jack hook to the jack and
connect the extension tubes. Access the
rear jacking location from behind the rear
tire. Place the jack under the axle between
the wheel and the shock bracket with the
extension with jack hook extending to the
rear.
Rear Lifting Point
Rear Jacking Location
5. By rotating the lug wrench clockwise, raise
the vehicle until the wheel just clears the
surface.
CAUTION!
Before raising the wheel off the ground, make
sure that the jack will not damage
surrounding truck parts and adjust the jack
position as required.
7
21_DS_OM_EN_USC_t.book Page 273
