GETTING TO KNOW YOUR VEHICLE
85
To install the bed extender into a divider
position, perform the following:
1. Make sure the center handle is unlocked
using the vehicle key and rotate the center
handle vertically to release the extender
side gates.
Center Handle And Lock
2. With the side gates open, position the
extender so the outboard ends align with
the intended slots in the sides of the bed.
Aligning Gate To Slots
3. Rotate the side gates closed so that the
outboard ends are secured into the
intended slots of the bed.
4. Rotate the center handle horizontally to
secure the side gates in the closed position.
Side Gates Closed
5. Lock the center handle to secure the panel
into place.
Extender Position
The extender position allows you to load the bed
of the truck beyond the tailgate. The bed
extender will add an additional 15 inches (38
cm) in the back of the truck when additional
cargo room is needed. The extender position
utilizes a locating pin and rotating handle
located on both sides of the truck bed near the
tailgate.
Extender Position
1 — Center Handle Lock
2 — Handle
3 — Unlocked Position
4 — Locked Position
2
21_DS_OM_EN_USC_t.book Page 85
