116
GETTING TO KNOW YOUR INSTRUMENT PANEL
NOTE:
A continuous chime will sound if the vehicle is
driven more than 1 mile (1.6 km) with either
turn signal on.
Check for an inoperative outside light bulb if
either indicator flashes at a rapid rate.
Cruise Control SET Indicator Light —
If Equipped With 7 Inch Instrument Cluster
Display
This light will turn on when the cruise
4WD AUTO Indicator Light —
If Equipped
This light alerts the driver that the
vehicle is in the four-wheel drive auto
mode, and the front axle is engaged,
but the vehicle's power is sent to the
rear wheels. Four-wheel drive will be
automatically engaged when the vehicle senses
Stop/Start Active Indicator Light —
If Equipped
This indicator light will illuminate
when the Stop/Start function is in
“Autostop” mode.
W
HITE
I
NDICATOR
L
IGHTS
Cruise Control Ready Indicator
This indicator light will illuminate
when the Cruise Control is ready, but
Cruise Control SET Indicator Light —
If Equipped With 3.5 Inch Instrument
Cluster Display
This light will turn on when the cruise
B
LUE
I
NDICATOR
L
IGHTS
High Beam Indicator Light
This indicator light will illuminate to
indicate that the high beam
headlights are on. With the low beams
activated, push the multifunction
lever forward (toward the front of the vehicle) to
turn on the high beams. Pull the multifunction
lever rearward (toward the rear of the vehicle) to
turn off the high beams. If the high beams are
off, pull the lever toward you for a temporary
high beam on, "flash to pass" scenario.
ONBOARD DIAGNOSTIC SYSTEM — OBD II
Your vehicle is equipped with a sophisticated
Onboard Diagnostic system called OBD II. This
system monitors the performance of the
emissions, engine, and transmission control
systems. When these systems are operating
properly, your vehicle will provide excellent
performance and fuel economy, as well as
engine emissions well within current
government regulations.
21_DS_OM_EN_USC_t.book Page 116
