RAM 1500 CLASSIC 2021 Page 117 Owner'S Manual Download

Page: 117 / 376

GETTING TO KNOW YOUR INSTRUMENT PANEL

115

ELLOW

NDICATOR

IGHTS

Low Fuel Indicator Light

When the fuel level reaches

approximately 3.0 gal (11.0 L) this

light will turn on, and remain on until

fuel is added.

TOW/HAUL Indicator Light

This indicator light will illuminate

when TOW/HAUL mode is selected

page 124.

Trailer Merge Assist Indicator Light —

If Equipped

This indicator light will illuminate to

indicate when Trailer Merge Assist

has been activated

page 146.

Cargo Light — If Equipped

This indicator light will illuminate

when the cargo light is activated by

pushing the cargo light button on the

headlight switch.

4WD Lock Indicator Light — If Equipped

This light alerts the driver that the

vehicle is in the four-wheel drive LOCK

mode. The front and rear driveshafts

are mechanically locked together,

forcing the front and rear wheels to rotate at the

same speed

page 131.

4WD Low Indicator Light — If Equipped

This light alerts the driver that the

vehicle is in the four-wheel drive LOW

mode. The front and rear driveshafts

are mechanically locked together

forcing the front and rear wheels to rotate at the

same speed. Low range provides a greater gear

reduction ratio to provide increased torque at

the wheels

page 131.

4WD Indicator Light — If Equipped

This light alerts the driver that the

vehicle is in the four-wheel drive

mode, and the front and rear

driveshafts are mechanically locked

together forcing the front and rear wheels to

rotate at the same speed.

NEUTRAL Indicator Light — If Equipped

This light alerts the driver that the

4WD power transfer case is in the

NEUTRAL mode and the front and rear

driveshafts are disengaged from the

powertrain.

REEN

NDICATOR

IGHTS

Park/Headlight On Indicator Light

This indicator light will illuminate

when the park lights or headlights are

turned on

page 45.

Front Fog Indicator Light — If Equipped

This indicator light will illuminate

when the front fog lights are on

page 45.

Turn Signal Indicator Lights

When the left or right turn signal is

activated, the turn signal indicator will

flash independently and the

corresponding exterior turn signal

lamps will flash. Turn signals can be activated

when the multifunction lever is moved down

(left) or up (right).

21_DS_OM_EN_USC_t.book Page 115

Summary of Contents for 1500 CLASSIC 2021

























































































































































































































































































































































































Search results

Summary of Contents for 1500 CLASSIC 2021

Reviews:

Related manuals for 1500 CLASSIC 2021

Brands by name

Popular brands

RAM 1500 CLASSIC 2021, Owner'S Manual

Search results

Summary of Contents for 1500 CLASSIC 2021

Reviews:

Related manuals for 1500 CLASSIC 2021

Brands by name

Popular brands