SERVICING AND MAINTENANCE
405
Center High Mounted Stop Lamp (CHMSL) With
Cargo Lamp
See below steps to replace:
1. Remove the two screws holding the
housing/lens to the body as shown.
CHMSL Mounting Screw Locations
2. Separate the connector holding the housing
and wiring harness to the body.
CHMSL Connector Location
3. Turn the desired bulb socket a quarter turn and
remove the socket and bulb from housing.
4. Pull the desired bulb straight from the socket.
Outside Bulbs: Cargo Lamps
Inside Bulb: Center High Mounted Stop Lamp
5. Reverse the procedure for installation of
bulbs and housing.
Cab Top Clearance Lamps — If Equipped
See below steps to replace:
1. Remove the two screws from the top of the
lamp.
Removing Rear Screw From Clearance Lamp
CAUTION!
Do not contaminate the bulb glass by
touching it with your fingers or by allowing it
to contact other oily surfaces. Shortened bulb
life will result.
CAUTION!
Do not contaminate the bulb glass by
touching it with your fingers or by allowing it
to contact other oily surfaces. Shortened bulb
life will result.
8
21_DPF_OM_EN_USC_t.book Page 405