RAM Commercial CHASSIS CAB 3500 2021 Owner'S Manual Download

Page: 340 / 463

338

IN CASE OF EMERGENCY

Even if the SOS Call system is fully functional,

factors beyond FCA US LLC’s control may

prevent or stop the SOS Call system operation.

These include, but are not limited to, the

following factors:



The ignition is in the OFF position.



The vehicle’s electrical systems are not

intact.



The SOS Call system software and/or hard

ware are damaged during a crash.



The vehicle battery loses power or becomes

disconnected during a vehicle crash.



LTE (voice/data) or 4G (data) network and/or

Global Positioning Satellite signals are

unavailable or obstructed.



Equipment malfunction at the SOS operator

facility.



Operator error by the SOS operator.



LTE (voice/data) or 4G (data) network

congestion.



Weather.



Buildings, structures, geographic terrain, or

tunnels.

NOTE:



Your vehicle may be transmitting data as

authorized by the subscriber.



Never place anything on or near the vehicle’s

LTE (voice/data) or 4G (data) and GPS

antennas. You could prevent LTE (voice/

data) or 4G (data) and GPS signal reception,

which can prevent your vehicle from placing

an emergency call. An operable LTE (voice/

data) or 4G (data) network connection and a

GPS signal is required for the SOS Call

system to function properly.



Changes or modifications not expressly

approved by the party responsible for compli

ance could void the user's authority to

operate the equipment.

WARNING!



Ignoring the overhead console light could

mean you will not have SOS Call services.

If the overhead console light is illuminated,

have an authorized dealer service the SOS

Call system immediately.



The Occupant Restraint Control module

turns on the air bag Warning Light on the

instrument panel if a malfunction in any

part of the system is detected. If the Air Bag

Warning Light is illuminated, have an

authorized dealer service the Occupant

Restraint Control system immediately.

WARNING!

ALWAYS obey traffic laws and pay attention to the

road. ALWAYS drive safely with your hands on the

steering wheel. You have full responsibility and

assume all risks related to the use of the features

and applications in this vehicle. Only use the

features and applications when it is safe to do so.

Failure to do so may result in an accident

involving serious injury or death.

CAUTION!

To avoid damage to the mirror during

cleaning, never spray any cleaning solution

directly onto the mirror. Apply the solution

onto a clean cloth and wipe the mirror clean.

21_DPF_OM_EN_USC_t.book Page 338

Summary of Contents for CHASSIS CAB 3500 2021
















































































































































































































































































































































































































































































Search results

Summary of Contents for CHASSIS CAB 3500 2021

Reviews:

Related manuals for CHASSIS CAB 3500 2021

Brands by name

Popular brands

RAM Commercial CHASSIS CAB 3500 2021, Owner'S Manual

Search results

Summary of Contents for CHASSIS CAB 3500 2021

Reviews:

Related manuals for CHASSIS CAB 3500 2021

Brands by name

Popular brands