RAM Commercial CHASSIS CAB 3500 2021 Owner'S Manual Download

Page: 171 / 463

STARTING AND OPERATING

169

To Set A Desired ACC Speed

When the vehicle reaches the speed

desired, push the SET (-) button and release.

The instrument cluster display will show the set

speed.

NOTE:

Fixed Speed Cruise Control can be used without

an ACC distance set. To change between the

different modes, push the ACC on/off button

which turns the ACC and the Fixed Speed Cruise

Control off. Pushing the Fixed Speed Cruise

Control on/off button will result in turning on

(changing to) Fixed Speed Cruise Control mode.

If ACC is set when the vehicle speed is below

20 mph (32 km/h), the set speed will default to

20 mph (20 km/h).

NOTE:

Fixed Speed Cruise Control cannot be set below

20 mph (32 km/h).

If either system is set when the vehicle speed is

above 20 mph (32 km/h), the set speed shall

be the current speed of the vehicle.

NOTE:



Keeping your foot on the accelerator pedal

can cause the vehicle to continue to accel

erate beyond the set speed. If this occurs, the

message “ACC DRIVER OVERRIDE” will

display in the instrument cluster display.



If you continue to accelerate beyond the set

speed while an ACC distance is also set, the

system will not be controlling the distance

between your vehicle and the vehicle ahead.

The vehicle speed will only be determined by

the position of the accelerator pedal.

To Cancel

The following conditions cancel the ACC or Fixed

Speed Cruise Control systems:



The brake pedal is applied.



The CANCEL button is pushed.



An Anti-Lock Brake System (ABS) event

occurs.

WARNING!

Leaving the Adaptive Cruise Control (ACC)

system on when not in use is dangerous.

You could accidentally set the system or

cause it to go faster than you want. You could

lose control and have a collision. Always leave

the system off when you are not using it.

WARNING!

In the Fixed Speed Cruise Control mode

(no ACC distance set), the system will not

react to vehicles ahead. In addition, the

proximity warning does not activate and no

alarm will sound even if you are too close to

the vehicle ahead since neither the presence

of the vehicle ahead nor the vehicle-to-vehicle

distance is detected. Be sure to maintain a

safe distance between your vehicle and the

vehicle ahead. Always be aware which mode

is selected.

21_DPF_OM_EN_USC_t.book Page 169

Summary of Contents for CHASSIS CAB 3500 2021
















































































































































































































































































































































































































































































Search results

Summary of Contents for CHASSIS CAB 3500 2021

Reviews:

Related manuals for CHASSIS CAB 3500 2021

Brands by name

Popular brands

RAM Commercial CHASSIS CAB 3500 2021, Owner'S Manual

Search results

Summary of Contents for CHASSIS CAB 3500 2021

Reviews:

Related manuals for CHASSIS CAB 3500 2021

Brands by name

Popular brands