RAM Commercial CHASSIS CAB 3500 2021 Owner'S Manual Download

Page: 211 / 463

STARTING AND OPERATING

209

* The suggested selection depends and

may change depending on the customer

preferences for braking performance. Condition

of the trailer brakes, driving and road state may

also affect the selection.
Display Messages
The trailer brake control interacts with the

instrument cluster display. Display messages,

along with a single chime, will be displayed

when a malfunction is determined in the trailer

connection, trailer brake control, or on the

trailer

page 90.

NOTE:



An aftermarket controller may be available

for use with trailers with air or EOH trailer

brake systems. To determine the type of

brakes on your trailer and the availability of

controllers, check with your trailer manufac

turer or dealer.



Removal of the ITBM will cause errors and it

may cause damage to the electrical system

and electronic modules of the vehicle. See an

authorized dealer if an aftermarket module is

to be installed.

Towing Requirements — Trailer Lights And

Wiring

Whenever you pull a trailer, regardless of the

trailer size, stoplights and turn signals on the

trailer are required for motoring safety.
The Trailer Tow Package may include a four- and

seven-pin wiring harness. Use a factory

approved trailer harness and connector.

NOTE:

Do not cut or splice wiring into the vehicle’s

wiring harness.

The electrical connections are all complete to

the vehicle but you must mate the harness

to a trailer connector. Refer to the following

illustrations.

Light Electric

Heavy Electric

Light EOH

Heavy EOH

Type of Trailer Brakes

Electric Trailer Brakes

Electric over Hydraulic

Trailer Brakes

Electric over Hydraulic

Trailer Brakes

Load

*Under 10,000 lbs (4,536 kg) *Above 10,000 lbs (4,536 kg) *Under 10,000 lbs (4,536 kg) *Above 10,000 lbs (4,536 kg)

WARNING!

Connecting a trailer that is not compatible with

the ITBM system may result in reduced or

complete loss of trailer braking. There may be a

increase in stopping distance or trailer instability

which could result in personal injury.

CAUTION!

Connecting a trailer that is not compatible

with the ITBM system may result in reduced

or complete loss of trailer braking. There may

be a increase in stopping distance or trailer

instability which could result in damage to

your vehicle, trailer, or other property.

21_DPF_OM_EN_USC_t.book Page 209

Summary of Contents for CHASSIS CAB 3500 2021
















































































































































































































































































































































































































































































Search results

Summary of Contents for CHASSIS CAB 3500 2021

Reviews:

Related manuals for CHASSIS CAB 3500 2021

Brands by name

Popular brands

RAM Commercial CHASSIS CAB 3500 2021, Owner'S Manual

Search results

Summary of Contents for CHASSIS CAB 3500 2021

Reviews:

Related manuals for CHASSIS CAB 3500 2021

Brands by name

Popular brands