RAM Commercial CHASSIS CAB 3500 2021 Owner'S Manual Download

Page: 353 / 463

IN CASE OF EMERGENCY

351

-W

HEEL

RIVE

ODELS

FCA US LLC recommends towing your vehicle

with all four wheels OFF the ground using a

flatbed.
If flatbed equipment is not available, and the

transmission is operable, the vehicle may be

towed (with the rear wheels on the ground)

under the following conditions:



The transmission must be in NEUTRAL

page 348.



The towing speed must not exceed 30 mph

(48 km/h).



The towing distance must not exceed

15 miles (24 km) for 6–speed transmission,

or 30 miles (48 km) for 8–speed transmis

sion.

If the transmission is not operable, or the

vehicle must be towed faster than 30 mph

(48 km/h) or farther than 15 miles (24 km) for

6–speed transmission, or 30 miles (48 km) for

8–speed transmission, tow with the rear wheels

OFF the ground. Acceptable methods are to tow

the vehicle on a flatbed, or with the front wheels

raised and the rear wheels on a towing dolly, or

(when using a suitable steering wheel stabilizer

to hold the front wheels in the straight position)

with rear wheels raised and the front wheels ON

the ground.

OUR

-W

HEEL

RIVE

ODELS

FCA US LLC recommends towing with all wheels

OFF the ground. Acceptable methods are to tow

the vehicle on a flatbed or with one end of vehicle

raised and the opposite end on a towing dolly.
If flatbed equipment is not available, and the

transfer case is operable, the vehicle may be

towed (in the forward direction, with ALL wheels

on the ground), IF the transfer case is in

NEUTRAL and the transmission is in PARK

page 215.

CAUTION!

Towing this vehicle in violation of the above

requirements can cause severe engine and/

or transmission damage. Damage from

improper towing is not covered under the New

Vehicle Limited Warranty.

CAUTION!



Front or rear wheel lifts must not be used

(if the remaining wheels are on the ground).

Internal damage to the transmission or

transfer case will occur if a front or rear

wheel lift is used when towing.



Towing this vehicle in violation of the above

requirements can cause severe transmis

sion and/or transfer case damage.

Damage from improper towing is not

covered under the New Vehicle Limited

Warranty.

21_DPF_OM_EN_USC_t.book Page 351

Summary of Contents for CHASSIS CAB 3500 2021
















































































































































































































































































































































































































































































Search results

Summary of Contents for CHASSIS CAB 3500 2021

Reviews:

Related manuals for CHASSIS CAB 3500 2021

Brands by name

Popular brands

RAM Commercial CHASSIS CAB 3500 2021, Owner'S Manual

Search results

Summary of Contents for CHASSIS CAB 3500 2021

Reviews:

Related manuals for CHASSIS CAB 3500 2021

Brands by name

Popular brands