RAM Commercial CHASSIS CAB 3500 2021 Owner'S Manual Download Page 144

Page: 144 / 463

142

STARTING AND OPERATING

(Continued)

Only shift from DRIVE to PARK or REVERSE

when the accelerator pedal is released and the

vehicle is stopped. Be sure to keep your foot on

the brake pedal when shifting between these

gears.
The transmission gear selector has only PARK,

REVERSE, NEUTRAL, and DRIVE positions.

Manual downshifts can be made using the

Electronic Range Select (ERS) shift control.

Pressing the GEAR -/GEAR + switches (on the

steering wheel) while in the DRIVE position will

select the highest available transmission gear,

and will display that gear limit in the instrument

cluster as 1, 2, 3, etc

page 145. Some

models will display both the selected gear limit,

and the actual current gear, while in ERS mode.

Electronic Transmission Gear Selector

Gear Ranges

Do not press the accelerator pedal when

shifting from PARK or NEUTRAL into another

gear range.

NOTE:

After selecting any gear range, wait a moment

to allow the selected gear to engage before

accelerating. This is especially important when

the engine is cold.

PARK (P)
This range supplements the parking brake by

locking the transmission. The engine can be

started in this range. Never attempt to use

PARK while the vehicle is in motion. Apply the

parking brake when exiting the vehicle in this

range.
When parking on a hill, apply the parking brake

before shifting the transmission to PARK. As an

added precaution, turn the front wheels toward

the curb on a downhill grade and away from the

curb on an uphill grade.

NOTE:

On four-wheel drive vehicles be sure that the

transfer case is in a drive position.

When exiting the vehicle, always:



Apply the parking brake.



Shift the transmission into PARK.



Turn the engine off.



Remove the key fob.

WARNING!



Never use the PARK position as a substi

tute for the parking brake. Always apply the

parking brake fully when exiting the vehicle

to guard against vehicle movement and

possible injury or damage.



Your vehicle could move and injure you and

others if it is not in PARK. Check by trying to

move the transmission gear selector out of

PARK with the brake pedal released. Make

sure the transmission is in PARK before

exiting the vehicle.

21_DPF_OM_EN_USC_t.book Page 142

Summary of Contents for CHASSIS CAB 3500 2021
















































































































































































































































































































































































































































































Search results

Summary of Contents for CHASSIS CAB 3500 2021

Reviews:

Brands by name

Popular brands

RAM Commercial CHASSIS CAB 3500 2021, Owner'S Manual

Search results

Summary of Contents for CHASSIS CAB 3500 2021

Reviews:

Brands by name

Popular brands