Raleigh Audio Standard Extreme RAKK dac Mark III, Assembly Manual

Page: 12 / 65

Mount the I2S Adapter to the RAKK dac
Steps preceded by a “note” (
♪ ) deal with components which must be oriented properly.
12. Mount four 1” standoffs on the bottom of the I2S Adapter and secure with 6-32 screws.
♪
13. Set the I2S Adapter on top of the RAKK dac such that the I2S Output connector on the I2S
Adapter aligns with the pins on the small adapter board.
14.
Plug the I2S Adapter into the small adapter board.
15. Install the four ⅜ ” standoffs as nuts to hold the two pieces together.
16. Form the wires neatly and make sure that the small adapter board is parallel to the I2S
Adapter and the connector is inserted properly. .
————————————————————————————
11