background image

5

2022 RALE® INDUSTRIES USER'S MANUAL

WARNING

Suspension travel reduces distance between 

exhaust and tunnel. 

Always position cargo and accessories to avoid contact with engine, 

exhaust, or moving componets.
Failure to comply may result in suspension interference, serious injury, 

fire, and or burns.

F

eatures

Warning labels are placed on the tunnel of the RALE® Track Kit. All 

operators should read and become familiar with each sticker. DO 

NOT remove or cover them. If they need replaced, order them from 

your RALE® dealer. 

WARNING

Prior to operation, read and understand USER'S 

MANUALS and all warnings.

• Always wear a DOT approved helmet, eye protection, and protective 

clothing while operating this vehicle

• Never carry a passenger

• Before starting engine, check throttle and brake for proper 

opperation

• Reduce speed and use extreme caution when operating in unfimiliar 

terrain

• Ensure that sprocket and track shrouds are in place and secure

• Do not operate with shrouds removed

• Only operate in snow and ensure safe snow conditions

Failure to follow these instructions could result in severe injury or death. 

if User's Manual is missing, contact your dealer for a replacment.

WARNING

Never pull or tow any person or object. 

Objects towed can easily colide with the rear or the track or other objects, 

resulting in severe injury or death.

Never ride on track tunnel.

Riding on the tunnel can cause entanglement with track resulting in 

severe injury or death.

Summary of Contents for MT120 2022









































Reviews: