background image

2022 RALE® INDUSTRIES USER'S MANUAL

2

WARNINGS

Please review and familiarize yourself with the following warnings 

and their significance. These warnings will be present throughout 

this Installation Guide.

DANGER

Potential of death, serious harm, or injury to the operator or 

bystander(s).

CAUTION

Possible damage to the motorcycle, track adaptation system, or 

adjacent property.

NOTICE

Specific instructions requiring extra attention or important topics 

to understand.

NOTE:

 It is not possible for RALE® to warn the owner or operator 

of every conceivable DANGER, CAUTION or NOTICE that may be 

encountered in relation to a RALE® Industries snowbike conversion 

kit. It is the responsibility of the owner and/or the operator to exercise 

good judgment to stay safe at all times 

DANGER:

 Cancer and Reproductive Harm www.P65Warrnngs.ca.gov

Before operating a vehicle equipped with a RALE® Track Kit, all 

operators should read and become familiar with the User’s Manual. 

The  latest  digital  version  of  this  manual  can  be  found  online  at                                                  

www.riderale.com
The document number, version number, and release date of this 

manual can be found on the inside cover. 

Summary of Contents for MT120 2022









































Reviews: