Documentation Center
Figure 16: WisBlock Core silkscreen on the RAK19010 Base Board
WisBlock IO
A WisBlock IO module is designed to be installed on the IO slot of the RAK19010 Base Board. As shown in Figure
17, the location is properly marked by silkscreen. Follow carefully the procedure defined in
x 3 mm screws depending on the WisBlock IO.
Figure 17: WisBlock IO silkscreen on the RAK19010 Base Board
WisBlock Sensor
A WisBlock Sensor module is designed to be installed on the sensor slots of the RAK19010 Base Board. As
shown in Figure 18, the location of the slots is properly marked by silkscreen. Follow carefully the procedure of the
section,
attaching a WisBlock Connector
, to attach a WisBlock Sensor module. Once attached, fix the module with
an M1.2 x 3 mm screw.
Figure 18: WisBlock Sensor silkscreen on the top of RAK19010 Base Board
Disassembling a WisBlock Module
1. The procedure to disassemble any type of WisBlock module is the same. As shown in Figure 19, first, remove
the screws.
