Documentation Center
RAK19010 Quick Start Guide
This guide introduces the RAK19010 WisBlock Base Board with Power Slot and how to use it.
Prerequisite
What Do You Need?
Before going through each and every step on using the WisBlock Base Board with Power Slot, make sure to
prepare the necessary items listed below:
Hardware
RAK19010 WisBlock Base Board with Power Slot
.
It is highly recommended to also check the dedicated Quick Start Guide that you can follow on various
WisBlock Modules. Each Quick Start Guide of these modules contains detailed steps on how to open the
example codes and upload them to the WisBlock Core.
Li-Ion/LiPo battery (optional)
Solar charger (optional)
Software
Based on the choice of the WisBlock Core, select a Development Environment:
Programming via Arduino IDE
RAKwireless BSP support for Arduino
In Arduino IDE, once you installed the BSP, the examples for WisBlock Core will be automatically included on
the list of examples.
Programming via PlatformIO IDE:
RAKwireless WisBlock modules in PlatformIO
Product Configuration
Overview
To give you a better understanding of how the WisBlock Base works, the block diagram and power supply diagram
of RAK19010 are provided in this section.
Block Diagram
The block diagram shown in Figure 1 shows the internal architecture and external interfaces of the RAK19010
WisBlock Base Board with Power Slot.
