RAK WisBlock RAK19010, Quick Start Manual

Page: 22 / 29

Documentation Center
Pin
Number Connector
A Connector
B Connector
C Connector
D
Type Description
1 TXD1 NC NC TXD1 I/O UART TX signal
2 GND GND GND GND S Ground
3 SPI_CS SPI_CS SPI_CS SPI_CS I/O
SPI chip select
signal
4 SPI_CLK SPI_CLK SPI_CLK SPI_CLK I/O SPI clock
5 SPI_MISO SPI_MISO SPI_MISO SPI_MISO I/O SPI MISO signal
6 SPI_MOSI SPI_MOSI SPI_MOSI SPI_MOSI I/O SPI MOSI signal
7 I2C1_SCL I2C1_SCL I2C1_SCL I2C1_SCL I/O I2C clock signal
8 I2C1_SDA I2C1_SDA I2C1_SDA I2C1_SDA I/O I2C data signal
9 VDD VDD VDD VDD S
Generated by CPU
module. Used to
power sensor
board if MCU IO
level is not 3.3 V
10 IO2 IO1 IO4 IO6 I/O
General purpose
IO. IO2 controls
the power switch of
3V3_S. When the
3V3_S function is
used, IO2 can not
be used as an
interrupt of the
sensor.
11 3V3_S 3V3_S 3V3_S 3V3_S S
3.3 V power
supply. Can be
shut down by the
CPU module.
12 IO1 IO2 IO3 IO5 I/O
General purpose
IO - IO controls the
power switch of
3V3_S. When the
3V3_S function is
used, IO2 cannot
be used as an
interrupt of the
sensor.
13 NC NC NC NC NC Not connected