Documentation Center
Figure 5: Fit the WisBlock Connector’s header inside of the socket
3. After the above alignment steps, the header and socket are matched but still not buckled.
Figure 6: WisBlock Connector’s header matched inside of the socket
4. Apply forces evenly by pressing in parallel, then there will be a sound confirming the completion of the buckling.
Figure 7: Apply forces to buckle the header to the socket
5. In the process of buckling and applying force, avoid the application of uneven force on both sides.
Figure 8: Avoid applying uneven forces
6. When the buckling process is completed, check that the header and socket are kept in parallel.
Figure 9: Correct way to buckle the WisBlock Connector’s header to the socket
