Copyright © Shenzhen Rakwireless Technology Co., Ltd
ETDX1602241830
27
RAK475 Instruction manual
4.2
AT command set
Table 4-1 AT command set
AT command
Description
Module management instruction
at+ascii=<mode>\r\n
Open ASCII display
at+mac\r\n
Query the module’s MAC address
at+easy_txrx\r\n
Enter
into
the
transparent
transmission mode
at+version\r\n
Query the software version
at+reset \r\n
Reset the module
at+restore\r\n
Resect to Factory Defaults
Parameter configuration instruction
at+write_config=Configure the parameter length
and parameter of \r\n
Write user configuration
at+read_config\r\n
Read the user configuration
at+read_restoreconfig\r\n
Read Factory Defaults
at+write_restoreconfig=Configure the parameter
length and parameter of \r\n
Modify the Factory Defaults
at+copy_cfg
Reproduce user configuration to be
Factory Defaults configuration
AP SAT operating instruction
at+con_status\r\n
Query the connection status of STA
at+ap_status\r\n
Query the connection status of AP
at+rssi\r\n
Query the wireless signal intensity
of STA
at+scan=<channel>,<ssid>\r\n
Scan the wireless network
at+get_scan=<scan_num>\r\n
Get indicated number of network
inFormation
at+easy_config\r\n
The module enters into instant
configuration mode
at+wps\r\n
The module starts WPS function,
adds the indicated router
at+ipconfig\r\n
Query IP parameters of the module
