Copyright © Shenzhen Rakwireless Technology Co., Ltd
ETDX1602241830
46
RAK475 Instruction manual
The command is unsuccessfully carried out
ERROR
ASCII
5
ERROR
<CODE>
HEX
1
0XFE=-2
the indicated ssid is not
found
\r\n
ASCII
2
End character
Remark
4.7.5
Get the wireless network
Command
at+get_scan=<scan_num>\r\n
Description
Read the scanned inFormation from the command, this command must be
called after the at+scan scan wireless network command.
Note:
If the wireless network inFormation is not required, the command can be
omitted.
Scanned inFormation has been read completely, if reading again, the module
will return the error -2, the at+scan command need to be called for scanning again.
Parameters instruction
<scan_num> is the amount of scanned inFormation that are read , if the
parameter is greater than the actual scanned amount, then the command will return
the actual scanned amount.
Parameter
Parameter
value
Instruction
