Raisecom ISCOM6820-GP Hardware Description Download Page 3 | Manualshive

Page: 3 / 61

background image

Raisecom
ISCOM6820-GP (A) Hardware Description

Preface

Raisecom Proprietary and Confidential

Copyright © Raisecom Technology Co., Ltd.

1

Preface

Objectives

This document describes the chassis, hardware components, and cables of the ISCOM6820-
GP, including hardware features, components, supported functions of each component, and
appearance and technical specifications of cables.

Versions

The following table lists the product versions related to this document.

Product name

Hardware version

Software version

ISCOM6820-GP

A.00 or later

V3.0 or later

Related manuals

The following table lists manuals and their contents related to the ISCOM6820-GP.

Name

Description

ISCOM6820-GP Hardware
Description

This guide mainly introduces the hardware structure and
cards, including product overview, components, fiber
and cables, pluggable optical module, lookup table of
LEDs, lookup table of weight and power consumption.

ISCOM6820-GP
Configuration Guide

This guide mainly introduces supported services of the
ISCOM6820-GP from aspects of service introduction,
default configurations, configuration methods, and
configuration examples, including basic configuration,
GPON service configuration, multicast service
configuration, MAC address table configuration, VLAN
configuration, Spanning Tree configuration, routing
configuration, DHCP configuration, QoS configuration,
system security configuration, link security
configuration, and system management configuration.

«
1
2
3
4
5
...
»

Summary of Contents for ISCOM6820-GP






























































Reviews:

No comments

Related manuals for ISCOM6820-GP

Brand: Qtx Pages: 4

Microflex MX400D Series

Brand: Shure Pages: 20

Brand: Listen Technologies Pages: 36

VHF-400 Duo Series

Brand: Malone Pages: 10

Brand: Beyerdynamic Pages: 20

Brand: SOUNDMASTER Pages: 110

Brand: Xiron Pages: 29

Brand: Blue Microphones Pages: 14

Brand: JVC Pages: 36

Brand: JVC Pages: 74

Brand: Kenwood Pages: 40

Brand: Kenwood Pages: 43

Brand: Kenwood Pages: 26

Brand: Kenwood Pages: 22

Brand: Kenwood Pages: 43

Brand: Kenwood Pages: 40

Brand: Kenwood Pages: 26

Brand: Kenwood Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands