Raise3D
Pro3 Series Printer
Remove the Printed Model
34
I.
Remove the Printed Model
Make sure the printer is idle, and there is at least
a 10 cm gap between the printed model
’s top
and the nozzle. This is to prevent the nozzle from
scratching the model or damaging the model
when it is taken out.
Wait for the build plate and nozzles to cool to
room temperature before removing any models.
If you want to remove the model before they
have sufficiently cooled down, please wear the
heat-resistant gloves from the attached
accessory box.
Turn the 2 red thumbscrews counterclockwise to
loosen them. Hold the red protective handle to
gently lift the printing surface, and then take out
the printing surface from the printer.
1.
2.
3.
