Raise3D
Pro3 Series Printer
Dual Extruder Printing (Advanced)
29
H.
Dual Extruder Printing (Advanced)
1.
In the “Edit Template” interface, click “Advanced” to view and modify more parameters.
2.
Under “advanced settings”, users can adjust the retraction amount of the filament in the “Extruder” tab.
Retract Material Amount
refers to the amount of filament drawn out to avoid stringing when the
nozzle quickly moves from point A to point B.
Retraction Amount of Extruder-switch
refers to the amount of filament retraction for an extruder
change. 0 refers to no retraction at all.
Note:
It is recommended to use the default parameters for Raise3D official filaments. For third-party
filaments, appropriate adjustments are required.
3.
User can adjust the “Inactive Cooling Temperature” in the “Temperature” tab.
Inactive Cooling Temperature
means that when this function is enabled, the inactive nozzle will drop to
the set temperature during printing.
For example:
Suppose that the right nozzle is idle while the left nozzle is printing, the temperature of the
right nozzle is still very high. The filament will melt to a liquid state and will drip onto the model due to
gravity, resulting in dyeing of the model. To avoid this issue, the temperature of the idle nozzle can be
reduced to a state where the filament will not melt and drip. But relatively speaking, it will increase the
printing time.
