Raise3D
Pro3 Series Printer
Hardware Installation
15
8.
After taking out the accessory box, keep following the Start-up Wizard to complete the basic settings
such as printer’s name, network, and RaiseCloud. After completing these basic settings, the printer will
carry out a 5-Step Offset Calibration. The whole process takes about 1 hour.
9.
Calibrating the offset value of the printer can improve the success rate of printing. The five-step
Offset Calibration involves the Left Z-Probe Offset, Right Z-Probe Offset, Bed Leveling, R-Nozzle XY-
Offset, and Dual-Color-Cube. The calibration process also includes loading filament to the printer.
Follow the prompts on the screen to load the filament and enter the five-step Offset Calibration.
10.
After completing all calibrations according to the instructions on the touch screen, proceed with the
subsequent printing.
Note:
Once all the basic settings are completed, a window introducing EVE Smart Assistant will pop up.
Please follow its instructions to proceed to the next step.
