Raise3D
Pro3 Series Printer
Hardware Installation
14
After the printer is powered on, the printer will
enter the boot process. It takes about 60
seconds for the printer to enter the Start-up
Wizard.
As shown in the left figure, the printer has
entered the Start-up Wizard. You can refer to the
prompts on the screen for further operations,
such as selecting the language for the printer.
After confirming that all the safety spacers and
screws are removed according to the screen
prompts, click “Next”. Open the front door, and
take out the accessory box and filament box from
the printer. Open these boxes and compare all
accessories with the following list.
5.
6.
7.
