12
GB
2) Program mode
Program 1 or 2 can both be programmed to operate or stop at
specific points in time at a set temperature. Read to learn how the
program is activated or deactivated. The following pages show you
how to set the program.
ON:
Press the button.
OFF:
Press until it disappears from the screen.
NOTE!
When the gas fireplace is set to Program mode, the fireplace will always be in standby mode (pilot flame lit).
REMOTE CONTROL
NOTE!
The fireplace has a delay in reaction. The time delay is up to 6 minutes from the last motor turn.
The On temperature delay is 0.75°C. The Off temperature delay is 2°C.
PROGRAM MODE
Scan the QR code to watch
a how-to-video
SETTING THE TEMPERATURE PROGRAM WITH TIME/DAYS
1. Press and hold until flashes. ON and the set temperature
(setting Thermostat mode) are displayed.
2. To continue, press the button or wait. , OFF is displayed, and
temperature flashes.
3. Select the temperature by pressing the or button.
4. To confirm, press the button.
NOTE!
The set operating temperature (Thermostat Mode) and the Off temperature are the same for each day.