16
GB
REMOTE CONTROL
SETTING THE LIGHT STRENGTH
1. Press and hold until flashes.
2. To set the light between 20% and 100%, press or .
3. To confirm, press or wait.
ON:
Press ( is displayed). The light switches on.
OFF:
Press ( disappears). The light switches off.
SETTING THE FAN (OPTIONAL)
The fan has 4 speed levels, from low (1) to high (4).
The fan system is not supplied with the RAIS fires.
ON:
1. Press and hold the button until flashes.
2. Press to increase the speed and press to decrease the
speed.
3. To confirm the setting, press or wait.
OFF:
Press until all 4 speed bars disappear.
SETTING THE CHILD LOCK
ON:
1. To activate the child lock, press the and buttons at the
same time.
If
is displayed, the remote control cannot be used apart
from the OFF function.
OFF:
1. To deactivate the child lock, press the and buttons at the
same time.
disappears.
NOTE!
The light works independently of the pilot flame. If you want to switch on the light without igniting the fire, press
.
When the light reaches 100%, the light will go into dimmer function, slowly adjusting the light between low and full strength.
HOW TO SET
THE LIGHT STRENGTH
Scan the QR code to watch a
how-to-video
SETTING THE CHILD LOCK
Scan the QR code to watch a
how-to-video