![background image](http://html1.mh-extra.com/html/rais/visio-100-f/visio-100-f_installation-manual_3551010048.webp)
48
GB
CLEANING
The fireplace should be cleaned of dust and foreign
objects when you use it for the first time in the year,
and especially if the fireplace has not been used for a
longer period.
You could do this using a soft brush and a vacuum
cleaner or by using a damp cloth with a non-abrasive
cleaning agent. Never use corrosive or abrasive
substances to clean this fireplace. The fireplace must
be cold before you clean it.
If the glass has a layer of soot, clean the glass using a
glass cleaner. Clean the outside of the fireplace using
a dry cloth.
Before using the fireplace for the first time in the
year, the flue system and flue gas connection must
always be checked for blockages.
Check the outside and inside of the fireplace for any
damage and pay particular attention to gaskets. Only
original RAIS spare parts may be used.
CLEANING THE CERAMIC LOGS
1. Remove the ceramic logs as described in steps
1-3 in “Recommended Service Guideline” on
page 47.
2. Carefully clean the ceramic logs using a soft brush
and a vacuum cleaner. Damaged parts may only
be replaced by original RAIS specified parts.
3. The scrapped ceramic parts should be disposed
of in the correct municipal disposal centres. It is
recommended that you use a vacuum cleaner
with a HEPA filter system.
4. Put back the embers layer and fit the glass. Ensure
that the fireplace functions correctly and is safe
to use.
MAINTENANCE
NOTE!
Non-reflecting glass must never be cleaned using
special glass cleaner – only use water.
Only clean the glass when the fireplace is cold.