4
CONNECTIONS WILL RESULT IN RESIN BEADS BEING THROWN INTO YOUR HOME'S PLUMBING SYSTEM CAUSING
DAMAGE TO IT AS WELL AS THE SOFTENER.
The following pipe can be used for installing your new system - Copper, CPVC, and PEX are the most popular.
Installation Location
You may choose not to treat the water spigots that go outside used for irrigation or sprinkler systems. You will have to
plan the job so that you cut in to feed the softener AFTER these spigots.
BEFORE YOU BEGIN INSTALLATION, CONFIRM THE INLET AND OUTLET OF THE UNIT AND IDENTIFY THE SERVICE
AND BYPASS POSITIONS OF THE VALVE
.
The bypass valve is used to isolate the unit from the plumbing system in order
to perform maintenance or repairs on the unit. During normal use the bypass valve should be in “SERVICE” position and to
isolate it, the valve should be turned to “BYPASS” position
.
Fig 1
