11
To change any setting under level 2 programming
-
press the “
” key and the value flashes
-
press the “ or ” keys to change the value
-
press the “
” key again to accept value
-
press the “ ” key to advance to the next value
The following chart indicates choices and default settings.
Note:
Default settings are indicated in
bold letters
Use same programming method as you used in level 1 to advance and/or change values.
Bold letters indicate default settings
Parameter
Option 1
Option 2
Option 3
Option 4
Comments
1
System Language
English
Spanish
French
Set to French if desired.
Spanish not enabled
2
Valve Operation
Softener
Filter
Iron
Filter
Leave at default setting
3
Regeneration
Mode
Meter
Delayed
Meter
Override
Calendar
Clock
Meter
Immediat
e
Leave at default setting
4
Regeneration
Time
2:00 AM
The unit is factory set to regenerate
at 2:00 AM on the day of
regeneration. You can change to
another time if desired.
5
Capacity
Calculation
Automatic
Manual
Automatic (recommended). Change
to manual settings if desired.
6
Resin Volume
For 30TFM unit, set resin volume at 1.0 cu ft
For 45TFM unit, set resin volume at 1.5 cu ft
For 60FM unit, set resin volume at 2.0 cu ft
7
Salt Setting
Leave at default setting. For best results set between 12 lbs/ft³ & 15 lbs/ft³. If you are
using a resin-cleaner as described on page 2, then you can lower it to 9 lbs/ft³.
8
Refill Flow Rate
0.7 GPM
Leave at default setting
9
Unit Capacity
For 30TFM, default = 30,000
For 45TFM, default = 45,000
For 60TFM, default = 60,000
10 Reserve Capacity
75
gal/person
Increase or decrease value as
desired
11 Capacity
Will be automatically calculated if step 5 is set for “Automatic”. This shows the total
gallons of soft water available before the unit will regenerate.
2.
Press “ ” (MENU) for 3
seconds to unlock screen.
JAN/21/2015
JAN/21/2015
JAN/21/2015
JAN/21/2015
05:27 PM
05:27 PM
05:27 PM
05:27 PM
4.
The display will read “
Press
MENU Key for 3 sec to unlock”
.
5.
After 3 seconds, the display will
beep confirming unlock
PRESS MENU KEY
PRESS MENU KEY
PRESS MENU KEY
PRESS MENU KEY
3 SEC TO UNLOCK
3 SEC TO UNLOCK
3 SEC TO UNLOCK
3 SEC TO UNLOCK
SYSTEM LANGUAGE
SYSTEM LANGUAGE
SYSTEM LANGUAGE
SYSTEM LANGUAGE
ENGLISH
ENGLISH
ENGLISH
ENGLISH
4. Press and hold “
”
together
for three seconds
to enter Level Two Master
Programming.
