Section 4.
Maintenance
WARNING
To avoid electric shock and other hazards which
could result in permanent injury or death, disconnect
(unplug) the cleaner from the power source before
performing any cleaning and maintenance.
4.1 Cord Tangling
Figure 12. Correct Floating Cable
IMPORTANT
The floating cable may become tangled if correct
procedure is not followed after each cleaning cycle.
After every cleaning cycle:
8QSOXJWKHÀRDWLQJFDEOHIURPWKH&RQWUROER[
2.
Remove the cleaner from the pool and untangle
DOONLQNVDQGFRLOVLQWKHÀRDWLQJFDEOHVWDUWLQJ
DWWKHFOHDQHUKHDG)LJXUH
3OXJWKHÀRDWLQJFDEOHEDFNLQWR&RQWUROER[
and store cleaner out of direct sunlight for next
use.
Figure 13. Untangle the Floating Cable
4.2 Replacing the Brushes
7KHFOHDQHULV¿WWHGZLWK39&EUXVKHVLQIURQWDQGUHDU
7KHUHDUHZHDULQGLFDWRUV)LJXUHRQWKHEUXVKHV
To maintain cleaner performance at its best you need
to replace the brush matt as soon as one of the wear
indicators has been reached (even if the bristle wear is
not even). Zodiac Group Australia Pty Ltd recommends
that you replace the brushes every two (2) years.
Figure 14. Wear Indicators
Stand the cleaner on its end in a vertical
SRVLWLRQ)LJXUH
Figure 15. Stand Cleaner Upright
2.
Separate the edges of the brush, undo the tabs,
and remove the worn matt.
10
H0446500_REV A
