3RVLWLRQWKHQHZEUXVKPDWWXQGHUQHDWKWKH
roller with the bristles facing downwards. Refer
WR)LJXUH
Figure 16. Position the New Brush on Roller
4.
Thread each tab into the slot provided and
gently feed it through until the heel comes out
DWWKHRWKHUVLGHRIWKHVORW5HIHUWR)LJXUH
4
Figure 17. Pull Tabs Through Each Slot
5.
Use scissors to cut the tabs at the guides, as
VKRZQLQ)LJXUH
Figure 18. Cut Tabs
5HSHDWWKLVSURFHGXUHWRUHSODFHWKHVHFRQG
brush matt.
4.3 Replacing the Track
6WDQGWKHFOHDQHURQLWVVLGH)LJXUH
Figure 19. Stand Cleaner on its Side
2.
Starting at one of the wheels, pull on the inside
of the track to separate the tire lip from the
ZKHHO6HH)LJXUH5HPRYHWKHWUDFNIURP
the cleaner.
Figure 20. Pull the Track Over Wheels to Remove
7RLQVWDOODQHZWUDFNSODFHWKHLQVLGHULERI
WKHWUDFNLQWRWKHJURRYHLQWKH¿UVWZKHHO6HH
)LJXUH
Figure 21. Position Track into Wheel Grooves
1
4.
Stretch the track around the second wheel, then
pull over the last wheel (see Figure 22). Push
and position the rib of the track so that the track
is seated properly in the groove of the wheel.
11
H0446500_REV A